32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
+6011-1626 9527
Davor Sdn Bhd
32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
Silicone Spray - Spanjaard Malaysia
SILICONE SPRAY
Silicone spray is an effective lubricant and can be applied on almost all kind of surface. It include metal, glass, rubber, fabric and plastic. When sprayed on hard surfaces, silicone spray is able to maintain its lubricating properties in a variety of temperature ranges and environments. Silicone will not oxidize and it can be usable up to 200 Degree Celcius and with excellent low temperature behaviour. It has very good stability to chemical substances and not soluble in water.
Product Description
SPANJAARD SILICONE SPRAY is registered with the NSF as a Category H1 lubricant for use in the food processing industry where incidental food contact may occur.. NSF Registration number is 139905
Silicone spray is an effective lubricant and can be applied on almost all kind of surface. It include metal, glass, rubber, fabric and plastic. When sprayed on hard surfaces, silicone spray is able to maintain its lubricating properties in a variety of temperature ranges and environments. Silicone will not oxidize and it can be usable up to 200 Degree Celcius and with excellent low temperature behaviour. It has very good stability to chemical substances and not soluble in water.
Product Description
SPANJAARD SILICONE SPRAY is registered with the NSF as a Category H1 lubricant for use in the food processing industry where incidental food contact may occur.. NSF Registration number is 139905
Application
1) Plastic and Rubber Moulding
All plant for moulding of plastics, whether by compression or injection, should use Spanjaard Silicone Spray. It is also effective on embossing rollers. Not only does Spanjaard Silicone Spray ensure positive release from moulds, it also imparts a better finish to products. In moulding or synthetic rubbers, Spanjaard Silicone Spray is a powerful release agent.
2) Printing and Stereotyping
In the print shop the uses of Spanjaard Silicone Spray are numerous. Every day new uses will be found. The most common applications are to prevent set off, to eliminate static adhesion, to avoid smudging. Periodic spraying of guillotine blades will increase their cutting life. Since Spanjaard Silicone Spray is used as a Release Agent in moulding, it has a definite place in the processing of stereos in metal and rubber.
3) Handling of Foodstuffs and Cooking
To keep conveyors and chutes free from greases and stickiness and to reduce friction, spray with Spanjaard Silicone Spray. Spanjaard Silicone Spray meets incidental food contact regulations and imparts no smell or taint. Spanjaard Silicone Sprayed in ovens and on utensils cleans more easily too.
4) Building Industry
The Silicone content of Spanjaard Silicone Spray makes the most effective releasing spray on shuttering. Also treat glass and face-brick surfaces with it to prevent the adhesion of paint and plaster.
5) Welding and Metal Casting
In core making, shell moulding and in the hot box and carbon dioxide processes, Spanjaard Silicone Spray will facilitate the operations. In foundry work too it will save time and tempers.
Welding - if surfaces are sprayed around the spot to be welded, weld spatter can easily be removed.
Benefits
Typical Properties
Technical Data Sheet
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.
Benefits
1) Water Resistant
It is resistant to water so it can be used to protect items from moisture. It is non oily but form a good lubrication layer to offer waterproof properties. Marine industry always use silicon spray as a rusty prevention spray. If sprayed on material, silicone spray will soak into the material and help water bead up and roll off the material.
2) Rubber Treatment
Silicone is a rubbery substance with superior sealing and lubricating properties. Due to the moisturizing property of silicone spray, it can help prevent rubber from cracking. If applied to rubber gaskets or other rubber items that may become dried, the rubber will be sealed. A sealed rubber gasket won't leak moisture and become dried out.
Typical Properties
| SILICONE SPRAY | TYPICAL DATA |
| Colour | Water Clear |
| Viscosity, cSt, 25 Degree Celcius | 500 |
| Flash Point, Degree Celcius | 315 |
| Pour Point, Degree Celcius | -50 |
| Density, g/cm3 | 0.97 |
| Expansion Coeff, | 9.2 |
| Thermal Conductivity | 0.15 |
| Volatility | <2 |
| Refractive Index | 1.4035 |
| Dielectric Const, 25 Degree Celcius/100Hz | 2.74 |
| Surface Tension at 25 Degree Celcius | 21.1 |
| Operating Temp. , Degree Celcius | -40 to 200 |
Technical Data Sheet
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.