32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
+6011-1626 9527
Davor Sdn Bhd
32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
Graphite Spray - Spanjaard Malaysia
Spanjaard Graphite Spray
Product Description
A dispersion of very fine particles of graphite in an air drying resin. It provides lubrication when oils and greases cannot be used. It is available in an aerosol spray.
Product Description
A dispersion of very fine particles of graphite in an air drying resin. It provides lubrication when oils and greases cannot be used. It is available in an aerosol spray.
Applications
Protective Coating
Spanjaard Graphite Spray prevents corrosion during shipping and storage. Thus expensive parts can be protected from rust and are prelubricated, ready for immediate use.
High Temperature Lubrication
Spanjaard Graphite Spray provides a stable lubricating film at temperatures of -180°C to 350°C. Even though resin breakdown starts at this temperature, the Graphite continues to act as a dry lubricant up to 450C.
Dry Lubrication
Spanjaard Graphite Spray is the answer when problems are caused by the application of conventional wet lubricants and provides dry lubrication in dusty conditions.
Application Instruction
Available Packing
400ml/320g Aerosol.
Contact our graphite dry lubricants spray Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at sales@davor.com.my.
Application Instruction
1. Check compatibility of solvents contained in Spanjaard Graphite Spray by testing on a small hidden area of surface to be sprayed.
2. Thoroughly degrease the component to be treated, preferably with a safety solvent, e.g. Spanjaard Electric Motor Cleaner which leave no residue.
3. Shake the aerosol can vigorously and apply one or more thin layers of Spanjaard Graphite Spray allowing 3 minutes drying for each coat.
4. After aerosol coating, wait 24 hours for the resin to cure at room temperature or cure at 250oC for one hour.
Available Packing
400ml/320g Aerosol.
Contact our graphite dry lubricants spray Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at sales@davor.com.my.