32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
 +6011-1626 9527
            
                  
| Previous | 1 / 4 | Next | 
| TYPICAL PROPERTIES | CHROME ANTI-SEIZE | 
| Consistency | NLGI No. 2 | 
| Penetration (1/10mm at 25°C, 60x) ASTM D217 | 275 | 
| Penetration change (10 000 x) | 35 | 
| Dropping point | None | 
| Timken OK load, kg (ASTM D2509) | >25 | 
| Copper corrosion test (ASTM D130) | 1b | 
| Base oil viscosity at 40°C, cSt (Brookfield) | 100 | 
| Max operating temperature as thread/anti-seize lubricant | 1 500°C | 
| Key metallic component | Chrome | 
| Colour | Silver | 
| Exceeds requirements of MIL-A-907E (US Military Spec) | Yes | 
| Average torque to loosen threaded connection after being subject to: | |
| 565°C | 55Nm | 
| 1 100°C | 175Nm | 
| Co-efficient of friction at 200N | 0.130 | 
| Compliance with latest First World Environmental Legislation | Yes | 
| Resistance to contact with Ammonia | Good | 
| Resistance to Electrolytic Galvanic Corrosion | Good | 
| Suitable for use on Austenitic/Stainless Steels | Yes | 
| High load, slow-moving lubricating properties | No | 
| Protection against corrosion of battery terminals | OK | 
| Apply to back of disc pads to eliminate squeal | No | 
| Contents of aerosol packs | 350 ml | 
| Packing in tubes | No | 
| Other packs (500g, 5kg, 15kg, 50kg & 180kg) | Yes |