32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
+6011-1626 9527
Davor Sdn Bhd
32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
Nickel Anti Seize - Spanjaard Malaysia
| Previous | 2 / 4 | Next |
Spanjaard Nickel Compound
Product Description
Nickel anti seize has excellent chemical and oxidation resistance. This make its very suitable to be used in oil and gas industry. Nickel is a good anti-seize and provide superior corrosion protection on all steel include stainless steel. The maximum operation temperature of this lubricants can up to1400 Degree Celcius.
Product Description
Nickel anti seize has excellent chemical and oxidation resistance. This make its very suitable to be used in oil and gas industry. Nickel is a good anti-seize and provide superior corrosion protection on all steel include stainless steel. The maximum operation temperature of this lubricants can up to1400 Degree Celcius.
Outstanding Features
- Prevents seizure and galling during assembly.
- Enables the easy dismantling of corroded component.
- Provides highly effective anti-seize in aggressive conditions, including chemical environments and salt water
- Enables components to be reused after dismantling
Application Instruction
The bulk versions should be applied by brush or finger.
The bulk versions should be applied by brush or finger.
Typical Properties
| TYPICAL PROPERTIES | NICKEL ANTI-SEIZE |
| Consistency | NLGI No. 2 |
| Penetration (1/10mm at 25°C, 60x) ASTM D217 | 275 |
| Penetration change (10 000 x) | 35 |
| Dropping point | None |
| Timken OK load, kg (ASTM D2509) | >25 |
| Copper corrosion test (ASTM D130) | 1b |
| Base oil viscosity at 40°C, cSt (Brookfield) | 100 |
| Max operating temperature as thread/anti-seize lubricant | 1 400°C |
| Key metallic component | Nickel |
| Colour | Silver |
| Exceeds requirements of MIL-A-907E (US Military Spec) | Yes |
| Average torque to loosen threaded connection after being subject to: | |
| 565°C | 62Nm |
| 1 100°C | 190Nm |
| Co-efficient of friction at 200N | 0.136 |
| Compliance with latest First World Environmental Legislation | No |
| Resistance to contact with Ammonia | Fair |
| Resistance to Electrolytic Galvanic Corrosion | Fair |
| Suitable for use on Austenitic/Stainless Steels | Fair |
| High load, slow-moving lubricating properties | OK |
| Protection against corrosion of battery terminals | OK |
| Apply to back of disc pads to eliminate squeal | No |
| Contents of aerosol packs | 350 ml |
| Packing in tubes | No |
| Other packs (500g, 5kg, 15kg, 50kg & 180kg) | Yes |
Available Packing
500 gram can
Contact our sales consultant in area: