32-G, Jalan Puteri 5/16,
Bandar Puteri Puchong,
47100 Puchong,
Selangor, Malaysia.
+6011-1626 9527

| Previous | 3 / 4 | Next |
| TYPICAL PROPERTIES | COPPER ANTI-SEIZE |
| Consistency | NLGI No. 2 |
| Penetration (1/10mm at 25°C, 60x) ASTM D217 | 275 |
| Penetration change (10 000 x) | 35 |
| Dropping point | None |
| Timken OK load, kg (ASTM D2509) | >25 |
| Copper corrosion test (ASTM D130) | 1b |
| Base oil viscosity at 40°C, cSt (Brookfield) | 100 |
| Max operating temperature as thread/anti-seize lubricant | 1 100°C |
| Key metallic component | Copper |
| Colour | Golden |
| Exceeds requirements of MIL-A-907E (US Military Spec) | Yes |
| Average torque to loosen threaded connection after being subject to: | |
| 565°C | 70Nm |
| 1 100°C | 200Nm |
| Co-efficient of friction at 200N | 0.140 |
| Compliance with latest First World Environmental Legislation | No |
| Resistance to contact with Ammonia | None |
| Resistance to Electrolytic Galvanic Corrosion | None |
| Suitable for use on Austenitic/Stainless Steels | No |
| High load, slow-moving lubricating properties | Excellent |
| Protection against corrosion of battery terminals | Excellent |
| Apply to back of disc pads to eliminate squeal | Yes |
| Contents of aerosol packs | 400 ml |
| Packing in tubes | 100g |
| Other packs (500g, 5kg, 15kg, 50kg & 180kg) | Yes |